OREX ACL4 Software
September 30, 2012 10:24
Good day!does anyone here has asoftware for orex acl4?the cpu we are using is corrupted.we need to reinstall the software.please email me at firstname.lastname@example.org thanks...
to rate and post a comment
re: OREX ACL4 Software
October 01, 2012 09:09
the file is over 300mb or at least the one I have. Where are you located?
re: re: OREX ACL4 Software
October 02, 2012 11:25
thanks for your kindness,I'm from Manila, Philippines.
re: re: re: OREX ACL4 Software
October 03, 2012 09:49
are you looking for the scanner software to install on your computer I will try to send you several files with the software so you can reload and also the procedures on how to install the software. You will be getting emails form a ftp site with the software files
re: re: re: re: OREX ACL4 Software
October 03, 2012 10:27
yes,thank you so much..
please send it thru email@example.com
November 02, 2012 10:20
Good day!i've already installed the software but i think the cr has a problem,the computer did not detect the cr unit,do you have a service manual for the orex?
re: re: re: re: re: OREX ACL4 Software
November 02, 2012 04:03
I have had this probllem before, on the I/O board where your USB cable plugs in there are several DC to DC converters check them to see if one is bad. You really do not want to buy that board it is outragiously expensive. I cross reference the converter because the one used is no longer available and then soldered it in using wires to the correct points.
re: re: re: re: re: re: OREX ACL4 Software
November 03, 2012 11:01
can you tell me what part number is the dc to dc converter is?and how is it look like?is that an ic?
March 16, 2015 06:25
you need to go to Device Manager on your computer running the software. Make sure you have made these files they sent you, bootable of a CD/DVD On Device Manager you need to find Orex connection and run the CD and find the: orex.sys file to update the driver. If that doesn't work, then you definitely did something wrong.
June 21, 2016 09:03
Would you have any idea the best computer to run the program for the PcCR 1417 ACL4? I am looking to reinstall the program but can't find the disc. The current program is running on Windows 2000 but I would like to buy a new computer that's faster but am unsure what's compatible. If you also have the disc I would be more than happy to reimburse you for your time and trouble. Thanks, Bill
re: re: re: re: re: re: re: OREX ACL4 Software
June 21, 2016 03:47
The program would only run on Windows 2000 or XP . . . you will never find a Windows 2000 on the market, unless you find a used PC and clean out the hard drive . . .not an easy task if you need to reinstall the OS. Find a Windows XP instead. Why are you gust still messing with obsolete equipment? it's mind blowing. send me an email perhaps I can help you: firstname.lastname@example.org
re: re: re: re: re: re: re: re: OREX ACL4 Software
February 03, 2017 10:09
Hi, can someone help me get the drivers for the ores, mine got corrupted?
June 07, 2018 02:57
You need to locate the Orex Scanner Driver file and run it from âDevice Managerâ in your software package if you have one, you need file: Orex02.sys
March 09, 2015 08:32
Can you send me the software please. My computer is failing and I need reintall it. email@example.com.
October 03, 2012 09:50
can you send to me?
October 05, 2012 06:44
Hello! I have the same problem my computer did not work anymore, Im in California, could you send me those files?
October 08, 2012 09:40
send me a email address
October 08, 2012 05:52
October 13, 2012 04:17
November 03, 2012 08:56
Hello! I have the same problem my computer did not work anymore, Im in Turkey , could you send me those files? Thank you very much
November 05, 2012 10:12
November 13, 2012 10:29
We have had problems with this CR two years ago. Seller said that waranty couldn't be cover because a virus infected cumputer and damaged ocr software. Now I guess that real problem could be the usb interface. We are in Mexico. They tried formating computer several times, leaving it without software.
Please could you send me software too and any schematics or pinout for hacking/repair power supply. Software is for xp,vista or W7. firstname.lastname@example.org
could you send to me email@example.com?
July 09, 2013 06:42
we also need the software for the Orex PcCR 1417 ACL4 system, please help. firstname.lastname@example.org
if you still have this software available please help us. our email is email@example.com
September 07, 2014 08:45
If anyone has backup of this software for the (Orex PcCR 1417 ACL4) could you please send me a copy to firstname.lastname@example.org
January 17, 2015 10:03
Same deal. It would make my day to get my hands on the software.
September 07, 2014 08:47
If anyone has a backup of the Orex PcCR 1417 ACL4 software could you please send me a copy to email@example.com Any help would be appreciated.
Do you found the software? Can you send to me. firstname.lastname@example.org
March 09, 2015 04:23
Any luck? Mine's still a paperweight.
March 16, 2015 11:18
did you find the software if not let me know
March 16, 2015 11:17
March 16, 2015 02:24
We found the USB and the LPT keys (drivers and license) but don't found the CD's with software.
March 16, 2015 04:31
look for an email from Sendthisfile should be there within an hour
Extremely grateful... I install it next Thursday and let you know. Thanks.
Senor, are you our software savior? Thanks. Spring.Creek.Veterinary@gmail.com
March 17, 2015 08:38
Someone has the user/scanner interface software?
or knows how to get/install this software?
March 17, 2015 10:23
did you receive it? only reason I am asking one of the files I sent yesterday looks like it errored.
March 17, 2015 04:35
I don't install it yet, I received one sendfile zip, +/- 108 megas. That's all?
March 17, 2015 04:36
I don't use it yet. I download from sendfile one Zip of 108 MB. Which one have error?
re: re: re: re: re: re: re: re: re: OREX ACL4 Software
March 18, 2015 06:20
no if you received it then there was not an error. I sent it to 3 people yesterday
re: re: re: re: re: re: re: re: re: re: OREX ACL4 Software
October 22, 2016 03:46
Hi Lenny, I need this software, any way you can email it or share by dropbox?
re: re: re: re: re: re: re: re: re: re: re: OREX ACL4 Software
October 25, 2016 10:11
Yes please send me an email address
re: re: re: re: re: re: re: re: re: re: re: re: OREX ACL4 Software
October 25, 2016 03:15
Lenny, can I get the software too? Thanks.
I got your zipped file with drivers and several update packages.
Every setup.exe (they are update only) ask for a User-interface installation folder previously installed.
It means I need the user/scanner-interface software before apply any update that comes in zipped files you kindly shared.
May 11, 2016 09:21
I alsow Need this Software PLS.. can anyone send me this or a Link to Download it..?? Pls Help.. Mailadress.: email@example.com
Thanks to all
May 11, 2016 12:00
where are you located? This is too large and sending it by pieces will not work. Lenny means well by helping you guys out but this installation works accurately only if you have the CDs.
May 11, 2016 02:50
Me and many others will be happy if you could share your CDs as iso files with dropbox or any other way.
you still need this? write me: firstname.lastname@example.org
May 11, 2016 09:22
I alsow Need this Software...can anyone sent it to me..?
Thanks to all.
May 29, 2016 03:00
I also need to re-install this software on a new computer & I can only find an update CD. Please help, can anyone help? email@example.com
June 07, 2018 09:44
Hello, you can send me the same software to this address firstname.lastname@example.org, thanks.
I also need to re-install this software on a new computer, but can't find the CDs that came with the unit. Please, if anyone can supply a download link for an .iso file, or burn & mail me a copy of your installation CD, it would be most appreciated (and I shall be glad to reimburse any copying & mail costs).
Thanks for any assistance.
I am also in need of the disc. I am having trouble with the Onyx program as well. I decided to buy a new computer to ensure the best results possible.
If you find a disc would you mind sending me a copy? I will be glad to reimburse you for any cost.
Really appreciate it.
send me an email. I can help you; email@example.com
June 26, 2016 03:30
Does anyone still have software. Our computer doesn't see the scanner anymore. Everything is connected, but software says disconnected. We updated computer couple years ago, but we still have the old computer. Don't have a disc.
October 25, 2016 10:22
I need the software too- I have the Orex PCCR 1417 on our work laptop and it is no longer working properly, tried to upload it from a disk and I assume it is out of date, hoping someone can help me out! Email is Caitlyn.firstname.lastname@example.org
if you upgraded the PC then that is your issue. The scanner driver only works on Windows 2000 or Windows XP. Windows 7 Pro . . . impossible.
October 26, 2016 10:56
We have an XP- government laptop. The others work fine. I was getting all black scans every time I tried. Deleted the software and now when I try to reload it from the disk I have, nothing happens. I don't know if the disk is just out of date or what.
October 27, 2016 03:52
Take the cassettes and make sure your Imaging plates are not in backwards first. Pull the inside laminate from the cassette and make sure the "backside"is where it needs to be.
October 28, 2016 11:24
I narrowed it down to software after some troubleshooting- tried the plates on a different laptop and they showed up perfectly clear. Unfortunately now I am unable to reload the software so I think my disks are an issue, or the computer software needs reloaded (which would be a completely different issue). Thank you for the advice.
October 28, 2016 11:23
If you have more similar digitalizer make a ghost image from good maquine.
May 15, 2019 10:27
Hello ! Could You help me? Can You send me the software to Orex Pccr 1417 ? my mail is email@example.com, thanks
May 16, 2019 10:25
You may download the software, manuals & info from my Google Drive at this link:
May 17, 2019 08:52
Thanks a lot :) I'm very grateful :)
At Atlas Electronics we don’t sell new monitors so we are highly motivated to repair your existing equipment. We repair all makes and models of Surgical Monitor Displays since 1981!
Call Nick at 214-923-4229 or email direct firstname.lastname@example.org