SEARCH
Aktueller Standort:
>
>
> Logic alpha 200 set date and time

Logic alpha 200 set date and time

(42)
(13)

Alfredo José Martinez Perales

Logic alpha 200 set date and time

August 02, 2016 10:49

I have a scanner Ge Logiq alpha 200 that you 've changed the system battery . Now do not know how I can change the date and time of the system. I connect with the service port but me nothing appears on the hiperterminal.Lo did once in a logiq 400, but this is not as connect and can not find information in the manuals. Thanks for your help , greetings.

Log inor Register

to rate and post a comment

Lenny Place

re: Logic alpha 200 set date and time

August 02, 2016 06:14

2--3 SERVICE MENU
2--3--1 Service Menu Over view
Key Operation
Arrow Up To move from menu to menu
Arrow Down
Ctrl + X To Exit submenu in System Diagnosis
Ctrl + R To Exit Service menu or to enter Service Top menu.
Note
Instead of Arrow keys the Trackball can be used to select item through the Service Menu.
Procedure 1
Follow these steps to enter the Service Menu.
Note
Probes should be installed in the port and Blue Shift key should be off before take these steps.
1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys.
2. Input the PASSWORD and press Return key.
The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5.
Service Utility MENU : Top Menu 99/03/12 09:16:37
Current Software Version is 3.0
*System Diagnosis
Board/Program Version
System Reset
Key Operation History
Option Set
Initialize :1 (1:America 2:Europe 3:Asia 4:Japan)
System Clock Adjust
Exit

i can send you a manual but need an email address

Log inor Register

to rate and post a comment

(42)
(13)

Alfredo José Martinez Perales

re: re: Logic alpha 200 set date and time

August 03, 2016 02:48

Thanks Lenny, my email is fred0_5@hotmail.com

Log inor Register

to rate and post a comment

(3)
(1)

Susan Newsom

re: re: Logic alpha 200 set date and time

October 26, 2016 10:57

Hello.. I am having the same problem with my date and time on the Alpha 200 after a battery change. Did you receive a solution? Please help.

A down system is not a good day.

susan.newsom@alphasource.com

Log inor Register

to rate and post a comment

(41)
(2)

Nadeem Hameed

re: re: Logic alpha 200 set date and time

September 13, 2017 10:57

Hi LENNY,please send it to me i have same problem and if possible password too please thanks
email id nadeem@al-hudameditech.com

Log inor Register

to rate and post a comment

(41)
(2)

Nadeem Hameed

re: re: re: Logic alpha 200 set date and time

September 14, 2017 09:07

ok

Log inor Register

to rate and post a comment

(2)

Anne Rothe

re: re: Logic alpha 200 set date and time

September 16, 2017 04:30

After changing the battery in my Logic alpha 200 it stops at the starting screen (Logic alpha 200 Version 2.1) and won't go into the normal examination mode. Can you help me?
mail@dr-rothe.de Thanks a lot!

Log inor Register

to rate and post a comment

PHILIPS Mx-8000 IDT/Brilliance 16 Slice CT Scanner -----Worldwide leader!!

HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com Call 813-925-1314 DOTmed Certified DOTmed 100

 

 

Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2017 DOTmed.com, Inc.
ALL RIGHTS RESERVED