Over 560 Utah Auctions End Tomorrow 12/09 - Bid Now
Over 350 Total Lots Up For Auction at Two Locations - MD 12/15, CA 12/21

Determining medical device support prior to purchase

by John R. Fischer, Senior Reporter | September 01, 2021
HTM Parts And Service
From the September 2021 issue of HealthCare Business News magazine


“If you know for a fact that the OEM is not telling you that you can buy a repair part, that should tell you that you won’t be able to repair this system in the field,” said Gomez-Morales. “So therefore, more than likely, it’s going to have to come back to some higher level of maintenance or go back to the OEM. If they are not listing the repair part, it could be because they don’t want you to fix that and want you to send it back to them, or you may require some additional training.”

Parts and consumable list information must be made in every request for information and request for quote, proposal or offer document, otherwise vendors and OEMs will not comply.

New & Refurbished C-Arm Systems. Call 702.384.0085 Today!

Quest Imaging Solutions provides all major brands of surgical c-arms (new and refurbished) and carries a large inventory for purchase or rent. With over 20 years in the medical equipment business we can help you fulfill your equipment needs


Gomez-Morales says the list of requirements for a strong IPS is only growing and now includes cybersecurity demands as well due to medical devices being more dependent on networks and requiring software updates.

He adds that all healthcare leaders should be aware of medical material product support requirements prior to a purchase to ensure the system is reliable, maintainable and sustainable, and that providers must be self-sustained. “When things like the pandemic happen, all bets are off and you’re on your own. If you don’t have this analysis in place it’s going to be hard to provide the right support for these medical devices because you’re so dependent on the vendor for a lot of these things.”

Back to HCB News

You Must Be Logged In To Post A Comment