NEW HYDE PARK, N.Y.--(BUSINESS WIRE)--In preparation for potential patient surge and shortage of critical mechanical ventilators for hospitalized COVID-19 patients, a Northwell Health physician, a respiratory therapist, and a 3D printing bioengineer have successfully designed the protocol to turn the more common bi-level positive airway pressure (BiPAP) machine into a functional invasive mechanical ventilator, through a 3D printed adaptor they also designed to aid in the conversion.
BiPAP is one type of PAP, or positive airway pressure, non-invasive machine that is commonly used to maintain a consistent breathing pattern at night or during symptom flare-ups in people with sleep apnea, congestive heart failure or chronic obstructive pulmonary disease (COPD), a chronic inflammatory lung disease.
As the health systems nationwide brace themselves for a potential increase in COVID-19 patients and New York Governor Andrew Cuomo calls for an increased supply of ventilators for hospitals statewide, a team led by Hugh Cassiere, MD, medical director for respiratory therapy services at North Shore University Hospital (NSUH) and Stanley John, NSUH’s director of respiratory therapy, developed a method to convert the non-invasive Philips Respironics V60 BiPAP machine into a pressure controlled ventilator for both patients with and without COVID-19 induced lung disease.
Numed, a well established company in business since 1975 provides a wide range of service options including time & material service, PM only contracts, full service contracts, labor only contracts & system relocation. Call 800 96 Numed for more info.
“Our hospitals are at the US epicenter of the coronavirus epidemic, and some of our COVID-19 patients require intensive care unit therapy and mechanical ventilators within minutes of being hospitalized,” said Dr. Cassiere. One sleepless night, Dr. Cassiere thought of the fleet of unused BiPAP machines in the hospitals. “I knew we could develop a way to repurpose and convert these machines to save hundreds of lives.”
Currently, Northwell Health has an adequate supply of ventilators for its patients, and the health system is continually trying to obtain more ventilators to prepare for a likely surge. And while there are plans in place to handle a surge in patient volume, Northwell Health has a good supply of BiPAP machines across its 23 hospitals, and if faced with a surge when ventilators numbers do get low, it would be helpful to use these machines.
The key component to converting the BiPAP machine is a small, plastic T-piece adapter. Because of COVID-19 related supply change shortages, Dr. Cassiere and Stanley John collaborated with Northwell Health’s 3D Design and Innovation department, and together they designed and 3D printed a T-piece in a matter of days.