DOTmed Home MRI Oncology Ultrasound Molecular Imaging X-Ray Cardiology Health IT Business Affairs
News Home Parts & Service Operating Room CT Women's Health Proton Therapy Endoscopy HTMs Mobile Imaging
SEARCH
Aktueller Standort:
>
> This Story


Log in oder Register to rate this News Story
Forward Printable StoryPrint Comment

 

 

MRI Homepage

The MR patient experience Technologists, effective distractions and advanced MR tech are improving patient comfort

When it comes to MR safety, make sure the right hearing protection doesn’t fall on deaf ears Understanding the dangers of ear damage during scans, and what can be done about it

From RF shield to detector choice: Designing a safer MR suite There's plenty of factors to consider before a patient even sets foot in the room

NIH grants over $1 million to development of non-contrast imaging approaches Will be used to diagnose peripheral arterial disease

Biannual MR may beat mammo for finding early stage breast cancer in high-risk patients Researchers were able to catch it before its spreading to lymph nodes

Forecasting issues before they arise with MR remote monitoring A look at the different solutions to keep you ahead of potential problems

Newest MR scanners and coils are faster, lighter and tailored to customer and patient needs

Reimbursement is lagging for MR-compatible cardiac devices Study finds hospitals on pace to absorb $400 million in extra costs

Gadolinium 'roadmap' report issued in journal Radiology Strategizing toward answering important, lingering questions

Scientists create synthetic MR images to train AI algorithms A way around training on rare abnormalities and patient privacy issues

GOKnee3D offers a clinically validated,
push-button, high-resolution 3-D exam
of the knee in only 10 minutes

FDA gives nod to Siemens’ GoKnee3D MR application

by John R. Fischer , Staff Reporter
A new MR application is set to enable evaluations of the knee in 3-D, while cutting diagnostic exam time down to as low as ten minutes.

Siemens Healthineers is preparing to release its GoKnee3D solution into the U.S. market following FDA clearance, a move that will allow physicians to analyze knees with just the push of a button.

Story Continues Below Advertisement

THE (LEADER) IN MEDICAL IMAGING TECHNOLOGY SINCE 1982. SALES-SERVICE-REPAIR

Special-Pricing Available on Medical Displays, Patient Monitors, Recorders, Printers, Media, Ultrasound Machines, and Cameras.This includes Top Brands such as SONY, BARCO, NDS, NEC, LG, EDAN, EIZO, ELO, FSN, PANASONIC, MITSUBISHI, OLYMPUS, & WIDE.



“A typical standard knee exam roughly takes about 20 minutes. Basically, it’s a 2-D knee exam so it has two contrasts and three planes,” Samantha Stein, MR product manager for Siemens, told HCB News. “With the GoKnee3D, we’ve not only been able to add another dimension to that so it’s 3-D instead of 2-D, but we’ve also been able to reduce the amount of time by half. You’re getting not only a better visualization of the knee, but you’re able to conduct an exam in a shorter amount of time.”

The solution is the second application developed as part of Siemens’ GO technology family, the first of which, GOBrain, was cleared for use by the FDA in April, 2016, following its debut at the 2015 RSNA annual conference.

GOKnee3D utilizes Siemens’ Large Joint Dot (Day Optimizing Throughput) engine’s auto-align feature to provide push-button functionality with high consistency in imaging.

It also enables faster imaging of the knee with all essential clinical contrasts and image reading in all planes, including double oblique and curved planar, with Siemens’ E11C AP04 software and the Tim 4G high density dedicated knee coil.

Such capabilities enable reduced exam and waiting times with improvements in patient experience.

“We’ve created a quick push button exam that reduces time so that our customers can analyze these frequently conducted exams at a faster rate,” said Stein. “The reason why we picked the knee is because it’s the third most frequently conducted MR exam based on what we’ve seen on our scanners.”

The application is currently available for use on MAGNETOM Aera 1.5T and the MAGNETOM Skyra 3T MR scanners, with plans to eventually integrate it other scanners in the Siemens’ portfolio.

Examination on 3T scanners is ten minutes with the solution and up to 11 minutes on 1.5T systems.

MRI Homepage


You Must Be Logged In To Post A Comment

Werben
Erhöhen Sie Ihren Bekanntheitsgrad
Auktionen + Privatverkäufe
Den besten Preis erzielen
Geräte/Geräteteile kaufen
Den günstigsten Preis finden
Daily News
Die neuesten Nachrichten lesen
Übersicht
Alle DOTmed Benutzer durchsuchen
Ethik auf DOTmed
Unseren Ethik-Standard anzeigen
Gold-Parts Verkäufer-Programm
PH-Anfragen erhalten
Gold Service Dealer-Programm
Anfragen empfangen
Gesundheitsdienstleister
Alle Gesundheitsdienstleister-Tools anzeigen
Jobs/Training
Einen Job suchen
Parts Hunter +EasyPay
Angebote für Geräteteile erhalten
Kürzlich zertifiziert
Kürzlich zertifizierte Benutzer anzeigen
Kürzlich bewertet
Kürzlich zertifizierte Benutzer anzeigen
Rental Central
Geräte billiger mieten
Geräte/Geräteteile verkaufen
Das meiste Geld erhalten
Service-Techniker Forum
Hilfe und Beratung finden
Einfache Angebots-Anfrage
Angebote für Geräte erhalten
Virtuelle Messe
Service für Geräte finden
Access and use of this site is subject to the terms and conditions of our LEGAL NOTICE & PRIVACY NOTICE
Property of and Proprietary to DOTmed.com, Inc. Copyright ©2001-2018 DOTmed.com, Inc.
ALL RIGHTS RESERVED