68126L - RDL RU-MLA2 Dual Mic/Line Preamplifier - NEW
Click Thumbnail for Full Image
RDL RU-MLA2 Dual Mic/Line Preamplifier - NEW
The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or line level signal. Both the front-panel XLR connectors and the rear-panel terminals are active at all times. The RU-MLA2 may be rack-mounted with the XLR jacks facing forward, or may be reverse-mounted using the RDL RU-FP1 Filler Panel/Reverse Mount Kit.
Each audio input is equipped with a rear-panel switch to select between MIC and LINE level. Two additional switches on each input allow setting the MIC input for LO or HI gain and for enabling or disabling standard 24 Vdc phantom. The two microphone gain settings allow the connection of a wide variety of dynamic and condenser microphones. Each output is provided with a separate rear-panel switch to set the associated level to either MIC or LINE. Audio outputs may be wired balanced or unbalanced. Crosstalk between channels is below the noise floor, allowing the RU-MLA2 to be operated as a stereo preamplifier or as two separate mono preamplifiers.
Gain trim for each channel is provided on a front-panel control. An RDL Dual-led VU meter is provided above each channel gain trimmer. The meters are calibrated to indicate +4 dBu for outputs set to line level.
The rear panel provides a detachable terminal block and a power input jack to connect 24 Vdc power. The RU-MLA2 audio outputs are active balanced. Each output of the RU-MLA2T is equipped with a studio-quality audio output transformer.
**No 24 Vdc power supply
Item is shipping from Big Lake, MN .
This item will be shipped UPS ground.
A fixed shipping charge of $ will be charged in the lower 48 United States.
This item comes with a 30 day warranty. During that time we will refund the purchase price (less shipping).
Refunds will be given once the item is received.
This item is pre-owned. Common sense dictates that before it is used in conjunction with patient care, it should be checked out thoroughly by your professional biomedical staff.
We will not warranty items if buyer does not follow our shipping recommendations listed above. Calibrated or sensitive electronic equipment should be sent "air ride, blank wrapped" and should not be sent straight freight if it is too large for UPS limits.
We accept PayPal, Visa, MasterCard, and American Express.
Payment must be made in full within 48 hours of winning sale.
Buyers in Minnesota will be charged sales tax
About , Inc.
This is a corporate account, questions will be answered Monday through Friday.
has been in business since 1977 and is located in Big Lake, MN. We buy and sell used medical equipment from 1 piece, 1 department, or an entire hospital. We deal in all disciplines of used medical equipment.
's Required Disclosure for Medical Equipment:
"The sale of this item may be subject to regulation by the . Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health:
Items are sold as-is with no returns or refunds available unless explicitly stated.