ADC, a world leader in core diagnostic products for over a quarter of a century, partnered with Suntech, the premier developer of innovative blood pressure technology to create the first truly modular diagnostic station that grows with your needs. Start with basic automated BP, then add thermometry and pulse oximetry AS you need it. Choose from wall mount, table mount or mobile configurations. Or convert the unit to the platform needed as your requirements change.
Unlike EVERY other monitor on the market, the ADView is completely modular. You can purchase the ADVIEW configured as you want from the factory OR upgrade the unit in the field at any time. No tools needed. With connect and go capability, adding optional temperature and pulse oximetry modules is effortless.
Features and Benefits
Automated BP monitor that measures systolic and diastolic pressure, pulse rate and MAP in about 30 seconds using the oscillometric method
Optional temperature module using Kendall’s Filac Fasttemp technology that provides an oral or axillary temperature in about 10 seconds. Built in storage well for the probe and box of 20 disposable probe covers
Optional SPO2 module that features industry leading Nellcor compatible technology for accurate readings in about 10 seconds
Purchase the ADC AdView™ configured as you want from the factory or upgrade in the field at any time
Three different mounting options allow for added flexibility. Unit can alternate between mounting options as your requirements change
Adult & Large Adult All Purpose Cuffs
8' blood pressure hose
Quick Start Guide
Oral/Axillary probe (blue)
1 box of FILAC FASTEMP probe covers
Reusable Adult Finger Sensor
6' Extension Cable
Child Cuff - 12-19cm
Small Adult Cuff - 17-25cm
Adult Cuff - 23-33cm
Large Adult Cuff - 31-40cm
Thigh Cuff - 38-50cm
Patient population: Adult and pediatric patients (age 3 and above).
Method of measurement: Oscillometric
Initial inflation pressure: 160mmHg +/- 20mmHg
Blood pressure range (mmHg): 60 < Systolic BP < 270, 30 < Diastolic BP < 170
Blood pressure accuracy: Measurements determined with this device are equivalent to those obtained by a trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by the American National Standard, Electronic or automated sphygmomanometers.
Blood pressure determination time 35-40 seconds typical for Adult cuff
Heart rate range: 30-200 bpm +/- 2% or +/- 3 bpm, whichever is greater
Temperature range: 86°F (30.0°C) – 109.4°F (43.0°C)
Temperature accuracy: +/- 0.2°F (+/-0.1°C)
Functional oxygen saturation range: 40-100%
Functional oxygen saturation accuracy: 70-100% +/- 2 digits
(Note: because pulse oximeter equipment measurements are statistically distributed, only about two-thirds of pulse oximeter equipment measurements can be expected to fall within ± 2 digits of the value measured by a CO-oximeter.)
Operating conditions: 10°C (50°F) to 40°C (104°F) Less than 90% RH
Storage conditions -20°C (-4°F) to 55°C (131°F) Less than 90% RH
Power External power supply for non-battery version: Globtek model: GTM21089-1506-T3 (SunTech part number: 19-0013-00)
External power supply for Battery version, rechargeable by Globtek model: GTM21089-1509-T3 (SunTech part number 19-0014-00)
Calibration: Check once per year for BP and Temperature
Safety systems: Independent hardware over-pressure circuit and redundant software overpressure algorithm to limit cuff pressure to less than 330 mmHg. Independent hardware timing circuit and redundant software timer algorithm to limit the duration of a blood pressure cycle to less than 180 seconds.
Dimensions: Length = 5.5 inches, Height = 11.5 inches, Width = 3.8 inches; Length =14.0 cm, Height = 29.2 cm, Width = 9.7 cm
Standards: UL60601-1, CAN/CSA C22.2 601-1
IEC 60601-1, IEC 60601-1-2 (EMC), IEC 60601-1-4, ISO 9919, AAMI SP10:2002, ASTM E 1112, EN 12470-3
Meets “Non-invasive Sphygmomanometers — General Requirements & Supplementary Requirements for Electro-Mechanical BP Measuring Systems”, EN 1060-1, EN 1060-3
Classification: Protection against electric shock: Class II (for non-battery version), Internally Powered Equipment (for battery version); Applied parts: Type BF; Mode of operation: Continuous
Adding Modules to your ADview 9000
Taking Automatic and Manual BP
Using the ADview 9000
Temperature and SPO2 Measurement
Items are sold as-is with no returns or refunds available unless explicitly stated.