Um zu verkaufen PHILIPS M3046A Monitor
- Ziostand : Used - Excellent
- Quantity : 1
- In Stock : Yes
- Date : August 21, 2019
Seller assumes all responsibility for this listing.
- Condition: Used - Excellent
- Brand: PHILIPS
- Type: Monitor
- Model: M3046A
Agilent Philips M3 M3046A Patient Monitor
This monitor features ECG, NIBP, IBP, SpO2 and Temp.
This monitor includes SP02 sensor, egc sensor, cuff and hose
The M3 Compact Portable Patient Monitor (M3046A)1is a small, light patient monitor offering a flexible monitoring solution to suit a broad spectrum of monitoring needs.
• Patient demographics, measurement data and trends, acquired and stored in the MMS, can be transferred to the M-Series (M3/M4)3 and Philips IntelliVue (MP60/MP70/MP90) patient monitors.
• EASI™-derived 12-lead ECG4 using a 5-electrode cable set.
• Multi-lead Arrhythmia.
• Up to 3 channels of ECG with basic Arrhythmia and ST Analysis capability.
• FAST-SpO2 measurement, using Fourier Artifact Suppression Technology, for accurate performance even with low perfusion.
• Respiration, Non-invasive and Invasive Blood Pressure, and Temperature measurements.
• Mainstream or Sidestream CO2, a second Invasive Blood Pressure and Temperature measurements, and enhanced Arrhythmia capability, available optionally.
210mm × 135mm × 210mm
(8.27" × 5.31" × 8.27")
3200 g (7.05 lb.)
100 to 240VAC, 50/60Hz,
0.4 to 0.7A
6.5" (diagonal) active color LCD (TFT)
640 × 480 pixels
Refresh rate: 60 Hz.
Horizontal frequency: 31.5 kHz
Resolution: 640 x 480 pixels
Video Signal: 0.7 Vpp @ 75 Ohm
HSYNC/VSYNC signal type: TTL
Connector: 15-pin D-SUB
- Up to 4 waves (depending on monitor option)
- Alarms Off (red crossed-bell LED).
- Alarms (red/yellow LED, 3 different alarm
- On/Standby (green LED).
- AC Power (green LED)
- Battery Status (green/yellow/red LED).
- QRS tone or tick, or SpO2 modulation tone.