Here is an AB Sciex Eksigent nanoLC Ultra 2D HPLC w/ Autosampler Pred 400
Manufactured by Eksigent, rebranded by AB Sciex.
Current models is NanoLC 400
This Eksigent nanoLC Ultra 2D HPLC system is in good working order.
Please see the exact video and photos below.
Testing we performed:
The Eksigent nanoLC Ultra 2D HPLC system passed all tests and was found to be fully functional:
Tested communication with software
Tested operation of pumps
Tested full operation of Autosampler AS-2 via Eksigent Control Software
Tested manual operation of injection valve switching and oven heater
System consists of:
Eksigent nanoLC Ultra 2D HPLC
nanoLC AS-2 Autosampler
eks-PS-250 Power supply
Dell Latitude i5 running Windows 10 with Eksigent Control Software ver4.2
Communication and power cables.
Configuration and Setup:
Maximum pressure: 10,000 psi
Ten-port valve: 2
Gradient 1: 50-500 nl/min, Gradient 2: 50-500 nl/min
AS-2 High Pressure Autosampler: Capacity Two microtiter plates (96 high/low or 384 low) or 48/12 sample vial racks, Injection valve 1/32 connection; 0.1 mm bore, Port-to-port volume < 25nl, Stainless Steel with proprietary coating on valve stator and rotor
Injection volume: Programmable from 100nl to 10ul with standard 10ul loop. Larger injection volumes possible with optional loop.
We pan out and get a view of the entire Eksigent nanoLC Ultra 2D HPLC system, from here we pan into the laptop and verify connectivity and software version.
From here we go to the pump and see it inside and out, same with the autosampler and submit manual commands to show the tray movement.
The rear of the Eksigent nanoLC Ultra 2D HPLC system is seen and all serial tags and connections and hoses are shown in detail.
Once we've seen the Eksigent nanoLC Ultra 2D HPLC system in it's entirety, we return to the front for a final view.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON "WEBSTORE" TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Items are sold as-is with no returns or refunds available unless explicitly stated.