- Location: NY, USA
- MFG: SIEMENS
- Modelle: E-CAM Signature series
- Type: Nuclear Gamma Camera
SIEMENS E.Cam Signature series Dual Head Nuclear Gamma Camera. This is a parts system.
We stopped using this system in 2018. We are part of a larger hospital group, and now the nuclear medicine studies are done at a different location.
This unit was manufactured 12/2005.
When this system was in use it was under a Siemens service contract, but it hasn't been used however the SNAC is not working. We do not know why.
The images were good when the system was removed from service.
The system is equipped with HD4 detector. The SNAC is Asm e.cam 6.0 with a Systium 545 computer.
There are four collimators with the system. Two each low energy high-resolution collimators, and two each medium energy L P collimators
I have been tasked with selling this system. I'm not an expert but I've added photos from the white book which describes the configuration of the system so look at the photos.
The room is being used for storage right now so the pictures reflect that, but the system was working when we stopped using it.
You can ask me any questions you like and I'll try to answer them.
DOTmed can arrange for deinstallation of the system or the successful bidder can deinstall it.
The gantry arms must be cut or removed so the system can fit on a elevator.
Whoever deinstalls it must have proof of insurance. Although the system can be dismantled during the day, it can only be taken down to the loading dock after midnight so as not to disrupt activity in the emergency room.
Also be advised that I measured the elevator and to remove the system the large heads must be removed to fit in the elevator unless there is some special tool for removing it with a smaller footprint.
The system is available immediately upon payment.
DOTmed can remove the system for $4500
The equipment is installed but not operational. During its use, it was covered by an OEM service contract.
WARNING TO ALL BIDDERS. DESPITE WHAT MAY BE WRITTEN IN THIS AUCTION, DOTMED RECOMMENDS THAT BIDDERS ASSUME THAT THE CONDITION OF THIS EQUIPMENT IS UNKNOWN. DOTMED ENCOURAGES YOU TO INSPECT EQUIPMENT BEFORE YOU BID. ALL ITEMS ARE SOLD 'AS IS' & 'WHERE IS' AND UNLESS THE SELLER HAS INDICATED OTHERWISE, THERE WILL BE NO REFUND.
Die Geräte werden sofort nach erfolgtem Zahlungseingang zur Abholung freigegeben.
You are free to inspect this equipment but if you want to inspect the equipment please do so before you bid. If you would like to arrange to inspect this equipment click on "Email Seller" above.
If something is not shown in the Auction's Photos or specified in the Auction Description please do not assume it is included. Inquire for specifics by clicking on "Email Seller" above.
The equipment is located in New York, NY.
The Successful Bidder agrees to remit payment in full within 48 hours of the Auction's close.
If the Successful Bidder fails to remit payment according to the schedule described above, then the equipment will be sold to the next highest Bidder.
Deinstallation, Packing, Crating and Transportation will be paid by the Successful Bidder.
Title will transfer from the Seller to the Successful Bidder upon payment in full.
There will be a nominal Auction Hosting Fee added to the amount due if you are the Successful Bidder. This fee will be paid directly to DOTmed.com
and not to the Seller of this Auction. See the Hosting Fee schedule in the table below.
|USD $1.00 and up
This equipment is offered in accordance with the "Auction Terms" and "Legal Notice" of www.dotmed.com. No warranty is expressed or implied, including any warranty of merchantability or fitness for a particular purpose. All equipment is sold "as is" and "where is".
Questions about this auction
There have been no questions regarding this auction yet. Ask a question