hi
I buy used ultrasound ge logiq p3 expert. the ultrasound was work well , but when I change the
the system to factory default, the ultasound showdown
and appears the squart dialogue : introduce licence key. and in the rear I found a stiker with the basic key . and i introduce this key and appears no valid license.
Press , on the QWERTY keyboard, and go to 'Admin' Tab (It is needed to be logged as ADM). Check if there is some HW ID info, and if it is something like 0x00000.
Maybe, due to the moving, some cable bad contact was provoked, and the license saved in the Application SW can't be matched to equipment's serial number.
If needed, remove equipment1s covers to acess its BEP (PC) and Front End, and check all cable connections. Restart, and see if it worked, if the license was recovered and the options appear active.
(1)
luiso
ultrasound ge logiq p3 expert
March 30, 2020 10:12
hi
I buy used ultrasound ge logiq p3 expert. the ultrasound was work well , but when I change the
the system to factory default, the ultasound showdown
and appears the squart dialogue : introduce licence key. and in the rear I found a stiker with the basic key . and i introduce this key and appears no valid license.
help me how i fix this problem
best regards
luiso
to rate and post a comment
(109)
(2)
Marcelo Antonio Correa
re: ultrasound ge logiq p3 expert
March 31, 2020 10:39
Hi, Luiso!
Press , on the QWERTY keyboard, and go to 'Admin' Tab (It is needed to be logged as ADM). Check if there is some HW ID info, and if it is something like 0x00000.
Maybe, due to the moving, some cable bad contact was provoked, and the license saved in the Application SW can't be matched to equipment's serial number.
If needed, remove equipment1s covers to acess its BEP (PC) and Front End, and check all cable connections. Restart, and see if it worked, if the license was recovered and the options appear active.
Good luck, take care, God Bless.
Kind regards,
MAC.
to rate and post a comment
(1)
luiso
re: re: ultrasound ge logiq p3 expert
April 03, 2020 10:26
thanks.
I reload original software and the basic key was valid. the ultrasound is working well.
best regards
luiso
to rate and post a comment
(1)
luiso
re: re: ultrasound ge logiq p3 expert
April 03, 2020 10:26
thanks
I reload software and basic key was valid. The ultrasound is working well.
best regards
luiso
to rate and post a comment