The only company with Blue Dot Certified pre-owned lasers & energy based devices. Ask about 1-year warranties on top OEM’s Cutera, BTL, Candela, Lumenis, Palomar, Alma, Syneron & Cynosure! (855) 819-3781 r.haller@sentientlasers.com www.SentientLasers.com
(1)
Emanuel Carmona
topcon cl-2000
January 05, 2006 10:51
when you start up the system appears "instrument error 4" in the screen, and the equipment doesn't want to make nothing, in the manual doesn't says about this. if someone can help me with this trouble. thanks
to rate and post a comment
(1)
(3)
Raphael Cortez
Re: topcon cl-2000
February 20, 2008 09:54
Hello My friend,
I am from Brazil and I work to ophtalmology's machine. I want to expanding my knowledgement about TOPCON machines.
I would like to know if do you have the service manual of the ARK-8000 or others machines? I have interest in to buy of you.
Thanks in advanced.
Raphael
to rate and post a comment
adam kowal
re: Re: topcon cl-2000
October 13, 2014 10:29
you have a service manual topcon CL2000? I have a lensometer and he works but dimly reads the axis. Maybe replacing the sensor ccd?
to rate and post a comment
(1)
united
re: re: Re: topcon cl-2000
August 13, 2015 10:48
ccd camera adjustment need it
to rate and post a comment
yassine benahmed
re: topcon cl-2000
March 05, 2014 08:39
check y ccd sensor and x ccd sensor check signal output if very low change comparator and reset machine if u dont know how todo pm me
to rate and post a comment
adam kowal
re: re: topcon cl-2000
October 13, 2014 10:29
you have a service manual topcon CL2000? I have a lensometer and he works but dimly reads the axis. Maybe replacing the sensor ccd?
to rate and post a comment
adam kowal
re: topcon cl-2000
October 13, 2014 10:29
you have a service manual topcon CL2000? I have a lensometer and he works but dimly reads the axis. Maybe replacing the sensor ccd?
to rate and post a comment
Luca Mazzocco
re: re: topcon cl-2000
July 12, 2017 11:09
Hi, I'm new to this forum, I'm trying to keep a cl2000 working. Did you ever fing the service manual. I have the user manual only and it's of no help. I have the "communication error 4"
Luca
to rate and post a comment
(5)
Zeljko Tomic
re: re: re: topcon cl-2000
May 15, 2019 10:29
Did you find service manual CL-2000?
If yes, please send it to me.
tomic@blic.net
I have the same error.
to rate and post a comment
Scott Zeigen
re: re: re: re: topcon cl-2000
August 02, 2022 11:47
There is a gear on the print head motor that on my unit was to close to the body of the motor that it did not contact the gears above. I removed this gear and placed three small eyeglass frame washers on the motor stem and then put the gear back on ... viola ... no more error 4 and the printer prints!
to rate and post a comment
Nader Seleen
re: topcon cl-2000
July 01, 2021 11:00
I need solution for this problem
to rate and post a comment