Tibor Ivanszky has replied to this error
re: dental panoramic planmeca Pm2002 error 24
May 11, 2012 09:56
ER 24 is primary slot motor timeout.
Cable or position sensor is broken or mechanical problem.
If you do not find solutionI can send you service manual.
Good luck
Tibor
I have one just like the one you have (Planmeca 2002 PM Proline EC with Dimax 3 sensor) with problem: - it was sent to me without calib tools, or manuals, or pc, or SW, or Licenses; Despite the fact that this unit is discontinued and out of support by Planmeca, thanks to personnel at Planmeca Portugal we've been able to install PC with Romexis and have the unit completely connected and ready to work; But the SW is asking for the sensor calibration files and I don't have anything and it will not work without this files. Since you have similar unit, could you send me sensor calibration files? Thanks.
(1)
Marcos Rodríguez
Panoramic RX Palmeca pm 2002 ec proline
February 20, 2019 09:40
Greetings from Tijuana, México..
I have planmeca a pm 2002 ec proline panoramic Ray machine, and i am having error 24 in this machine does that mean as i do not have the service manual
Of someone have the error codea or service manual for this machine Will be greatly appreciated..
Thank you
maordez@gmail.com
to rate and post a comment
(4)
Zdenko Vukoja
re: Panoramic RX Palmeca pm 2002 ec proline
February 21, 2019 10:25
Look email...
to rate and post a comment
Leonardo Chacon
re: re: Panoramic RX Palmeca pm 2002 ec proline
March 12, 2019 01:29
Hi sr. can you please send me a copy of the service manual? I am getting er64
leonardoecv@gmail.com
to rate and post a comment
Joseluis Morales
re: re: Panoramic RX Palmeca pm 2002 ec proline
February 23, 2022 10:20
hello , do you have the service manual for the planmeca proline EC ? i will appreciate very much your help
to rate and post a comment
(220)
(4)
Faustino Pereira
re: Panoramic RX Palmeca pm 2002 ec proline
February 21, 2019 10:25
Tibor Ivanszky has replied to this error
re: dental panoramic planmeca Pm2002 error 24
May 11, 2012 09:56
ER 24 is primary slot motor timeout.
Cable or position sensor is broken or mechanical problem.
If you do not find solutionI can send you service manual.
Good luck
Tibor
to rate and post a comment
fawzy fayed
re: re: Panoramic RX Palmeca pm 2002 ec proline
April 17, 2019 09:48
can you send me service manual plz
to rate and post a comment
(36)
Luis Fernando Garcia Sanchez
re: re: re: Panoramic RX Palmeca pm 2002 ec proline
April 18, 2019 12:31
You find manual un www.frakshospitalworkshop.com ,regards
to rate and post a comment
(1)
Abd Ullah
re: Panoramic RX Palmeca pm 2002 ec proline
February 21, 2019 10:26
You have problem with sensor
Up the machine
I can help you
Continue with me
abdlaamin0@gmail.com
to rate and post a comment
kasandra dowling
re: re: Panoramic RX Palmeca pm 2002 ec proline
December 09, 2019 10:40
good day I am having this problem with error code 24 was wondering if you can assist thanks
to rate and post a comment
(1)
(4)
Daniel Dinis
re: Panoramic RX Palmeca pm 2002 ec proline
July 16, 2019 11:27
Dear Marcos,
I have one just like the one you have (Planmeca 2002 PM Proline EC with Dimax 3 sensor) with problem: - it was sent to me without calib tools, or manuals, or pc, or SW, or Licenses; Despite the fact that this unit is discontinued and out of support by Planmeca, thanks to personnel at Planmeca Portugal we've been able to install PC with Romexis and have the unit completely connected and ready to work; But the SW is asking for the sensor calibration files and I don't have anything and it will not work without this files. Since you have similar unit, could you send me sensor calibration files? Thanks.
to rate and post a comment
kasandra dowling
re: re: Panoramic RX Palmeca pm 2002 ec proline
December 09, 2019 10:40
hi good day am having the same problem with error code 24 I also do not have calib tools or files did you have any luck finding these?
to rate and post a comment