You should check your Debris Prevention Shutter and the sensor while you are at it. You may want to check to make sure there isn't something stuck in there. Sometimes technologists by accident forget to remove the L/R markers and they fall through the shutter. For this, you need to open up the covers and inspect the machine. Never run the CR without first clicking off the High Voltage at the CPU Board.
We are the best choice for all your Endoscopy needs. We have Certified Pre-Owned refurbished and used Endoscopes, and all other related components and
accessories. We are committed to your absolute satisfaction. (513) 469-7267
EDSON GDULA
Manual service capsule carbon XL II
February 19, 2019 10:10
I need the service manual of the capsule XL II CR CARBON, she is with the error 10332 by kindly someone could send it to me thanks
to rate and post a comment
(7)
MRS
re: Manual service capsule carbon XL II
February 20, 2019 09:41
You should check your Debris Prevention Shutter and the sensor while you are at it. You may want to check to make sure there isn't something stuck in there. Sometimes technologists by accident forget to remove the L/R markers and they fall through the shutter. For this, you need to open up the covers and inspect the machine. Never run the CR without first clicking off the High Voltage at the CPU Board.
to rate and post a comment
muhammad raza
re: Manual service capsule carbon XL II
June 24, 2019 10:42
yes i can help you i got the service manual if you want..
to rate and post a comment