Medilab Global provides high-quality pre-owned imaging equipment, parts, and service to the healthcare industry worldwide. Our number 1 position is to provide excellent customer service.. 305-234-0084 | Email: info@medilabglobal.com | Hablamos Español
(15)
John Edwards
Jedi software
September 04, 2013 09:17
Hello
I am trying to use the service software for a Protues. My problem is with my laptop. Windows 7 is loaded as the operation software. I'm trying to use dosBox.074 turn run the software. Has anyone had any success with this approach?
to rate and post a comment
Lenny Place
re: Jedi software
September 05, 2013 06:59
I figured it out. In the Virtual Machine/Windows XP Mode there is a “Tools”
dropdown (when you’re NOT in full screen mode). There is a feature to “Disable
Integration features”. After doing that ASIAN would run fine. You can go to
settings in the same drop down and tell it to do that all the time or it will
revert back each restart, works either way. It has something to do with what
hardware it shares with Win7 I think. Some genius on the web said this would
let these types of DOS apps run in Virtual Machine and it does! Then I realized
I had to find and install XP drivers for my USB-Serial adapter in XP Mode,
change my COM port assignments so the adapter is COM1 and NOW it runs like a
champ in Virtual Machine!! Sweet!
to rate and post a comment
(36)
Luis Fernando Garcia Sanchez
re: re: Jedi software
December 07, 2016 10:16
I am looking Jedi service tool for cte.Can you help me?. email luisfernandogarcias@yahoo.com thanks in advance
Luis F. Garcia
to rate and post a comment
Lenny Place
re: re: re: Jedi software
December 08, 2016 09:20
On GE CT the Jedi service tool should be imbedded in the SUIF that is if the 3rd party function is enabled. I can send you the Asian software but I have never needed when working on CT's
to rate and post a comment
(5)
Zeljko Tomic
re: re: re: re: Jedi software
May 03, 2021 12:55
I need Jedi software for Proteus XR/a, too.
Can You send it to me?
to rate and post a comment
(2)
(1)
wang xin
re: re: Jedi software
January 29, 2018 09:19
Dear Lenny Placeï¼
Which one Serial COM port Do you connected on the GENERIC IF V2 board in Definium 6000?
to rate and post a comment
(2)
John Noel
re: Jedi software
September 05, 2013 06:59
I am running Jedi on my laptop using dos box and a USB to serial converter. You need to be using com port 1 to communicate with the generator. One of our service guys found that he had to have jedi running on his laptop before turning the generator on. You also need to using a straight through cable and not a null modem cable to connect your laptop to the generator.
to rate and post a comment
(1)
Miguel de los Santos
re: Jedi software
November 06, 2014 04:21
Dear John
Could you send me one copy of jedi software?
Best regards
Miguel
to rate and post a comment
Lenny Place
re: re: Jedi software
November 08, 2014 09:31
please send me an email address
to rate and post a comment
Philip
re: re: re: Jedi software
December 07, 2014 12:06
Dear Lenny,
I am also in need of jedi service tool software for Jedi Generator. the CD i got don,t have file (E7843_R.mx)for toshiba tube .
Could you please send me the software on kamran.stc@gmail.com
Thanks in Advance.
to rate and post a comment
Lenny Place
re: re: re: re: Jedi software
December 08, 2014 06:10
I am sorry I do not have the 7843 file. have you tried to use one of the other tube type
to rate and post a comment
(14)
Kamran Butt
re: re: re: re: re: Jedi software
December 09, 2014 11:54
Thankyou lenny i got it somehow.
to rate and post a comment
Dat Phan
re: re: re: Jedi software
July 11, 2015 09:27
Could you send me one copy of jedi software?
I have a problem with them. This is my email. datvanphan31191@gmail.com.
I'm totally thank you.
to rate and post a comment
(5)
Matias Roldan
re: re: re: Jedi software
September 28, 2018 09:11
Hello Lenny, can you help me with JEDY software to know the error log of sillueth Vr x rays? Support me please
danielrkoorton@gmail.com
to rate and post a comment
Lenny Place
re: re: re: re: Jedi software
October 01, 2018 12:56
Yes will send using a site called myairbridge in a few
to rate and post a comment
(1)
Gustavo Cornejo
re: re: re: re: re: Jedi software
May 30, 2020 02:18
Hello please, can you help me with JEDY software I need urgent
i have many time find this
to rate and post a comment
Glebov Alexander
re: re: re: re: Jedi software
February 06, 2023 10:34
hello, were you able to view the errors with the jedi service software? I have the same problem. As I understand it, JEDI software is needed
to rate and post a comment
Marcelo Somavilla
re: re: re: Jedi software
July 04, 2019 10:01
Lenny, could you send me one copy of jedi software ?.
For Silohuette VR, Version 1.2
Regards
marcelosomavilla@outlook.com
to rate and post a comment
Lenny Place
re: Jedi software
July 12, 2015 02:11
Are you running compatibility mode windows xp sp3
to rate and post a comment
(1)
pablo Picardo Garay
re: re: Jedi software
October 24, 2019 03:36
Dear Lenny,
I am having problems for connection of Jedi Sw with a GE XR6000 system. Do you have the layout connection of the serial cable? Many thanks and regards
to rate and post a comment
Lenny Place
re: re: re: Jedi software
October 28, 2019 10:29
it i a standard null modem cable
pins 2 and 3 crossed over
to rate and post a comment
DanÃel Sigurðsson
re: Jedi software
January 20, 2016 08:29
Hello
I am in dire need of the JEDI software. I only get "Please power up again" and need to read the error logs from the machine to get further information.
My email is: daniel@raforninn.is
Thanks in advance.
to rate and post a comment