hello everybodies!
I changed all five the same hdd's at one of four rdd. configuring rdd doesn't work.
it wrote on cmd utility (. /RDDUtil.exe) Error checking min/max ED'S table against disk sizes in RDD.
I checked file RDDSize. txt and there include the next prompt
0x04385280 0xffffffff
old disks is seagate st3300653fc 279 gb
new disks are the same by shield on body but the system identify it as seagate DKS2G-K300FC 277 gb.
if anybody wants to help me, I have some photos at this problem.
my e-mail: shtopor63@mail.ru
Privet Sergei. At the manual also says and I experienced also, you should change all five hdd at the same time at RTM even only one of them is defective. And after no need to make rddutil, you have to make all together at admin menu; configure, re-build....so on. And one more thing if the old hdd is chetea 15.5k and the new 5 should 15.5k. Good luck.
Hi Sergei!
I think RDD not accept this new HDD becose all original HDD hawe modifed FW and cost much more like regular. This is a reason way RDD not work as You will.
What is exactly model of new FC HDD?
What problem was with old FC Seagate?
Vsego nailuchshego,
Uldis
Raid SYstem read drive full passport and as I told all drive`s have modificed Passport and FW to prevent using other drives.
You can tray to take out HDD with BAD sector and format with Seagate tools or You can tray to repair defective sector with HDDREG program (DOS) on PC with SAS FC card. If You`l have good result, put it back to RDD and rebuild as told mr. Tolga.
If You have more problem HDD`s to do this again with next drive.
If You will I can repair You drive`s with PC3000 tool. For this You must sent Drive`s to my and after work I sent it back.
Good lock
Hi Sergei!
Your HDD is ST3300655FC from SEAGATE not st3300653fc.
If System show new HDD`s as DKS2G-K300FC - this is HITACHI HDD, not SEAGATE ??
Where You bay this new FC dive`s?
Your New HDD is realy Hitachi RAW drive and no way to made Seagate from it. I find: https://www.pcmleasing.com/product/300gb-15k-fibre-drive-upgrade-for-usp-v/
This drives is adapted to work with HDS USP-V and USP-VM subsystems.
Is ir origiginal RDD configuration with 300GB FC drives in RDD? When manufactured AQ64?
Ok. What if I send HDD's to you how mr. Amado says for formatting to required byte/sector table?
Or maybe you have required HDD's from Toshiba and can sale it me?
When system build Raid (samself) no way to adjust sector seze, it`s integrated in Raid hardware and Firmware. At start Raid initialise and add all HDD (like BIOS in PC) and after them build, format or use massive.
Sergei You not answer to me cuesion about Raid configuration, becose in me AQ64 is 4x5x73gb FC HDD. Is it original complectation?
Best way to comunicate - write e-mail: uldis007@inbox.lv
HIGH QUALITY fully tested & refurbished systems to manufacturer specifications like new. Installation & service support worldwide. Parts & tubes in stock with warranty. Sales@Elsmed.com
(3)
Sergei Nikitin
ct Toshiba aquilion 64
May 15, 2018 09:53
hello everybodies!
I changed all five the same hdd's at one of four rdd. configuring rdd doesn't work.
it wrote on cmd utility (. /RDDUtil.exe) Error checking min/max ED'S table against disk sizes in RDD.
I checked file RDDSize. txt and there include the next prompt
0x04385280 0xffffffff
old disks is seagate st3300653fc 279 gb
new disks are the same by shield on body but the system identify it as seagate DKS2G-K300FC 277 gb.
if anybody wants to help me, I have some photos at this problem.
my e-mail: shtopor63@mail.ru
to rate and post a comment
(19)
Tolga GULUMSER
re: ct Toshiba aquilion 64
May 16, 2018 09:18
Privet Sergei. At the manual also says and I experienced also, you should change all five hdd at the same time at RTM even only one of them is defective. And after no need to make rddutil, you have to make all together at admin menu; configure, re-build....so on. And one more thing if the old hdd is chetea 15.5k and the new 5 should 15.5k. Good luck.
to rate and post a comment
(18)
Uldis Verdins
re: ct Toshiba aquilion 64
May 16, 2018 09:18
Hi Sergei!
I think RDD not accept this new HDD becose all original HDD hawe modifed FW and cost much more like regular. This is a reason way RDD not work as You will.
What is exactly model of new FC HDD?
What problem was with old FC Seagate?
Vsego nailuchshego,
Uldis
to rate and post a comment
(3)
Sergei Nikitin
re: re: ct Toshiba aquilion 64
May 16, 2018 04:05
Hi!
new hdd's the same (as sticker), but on system wrote seagate DKS2G-K300FC.
old two hdd's broken sectors.
to rate and post a comment
(19)
Tolga GULUMSER
re: re: re: ct Toshiba aquilion 64
May 16, 2018 10:57
If you read and understood my comment, it will solve your problem. Otherwise donât spend your time for unusefull things.
to rate and post a comment
(18)
Uldis Verdins
re: re: re: ct Toshiba aquilion 64
May 17, 2018 09:16
Raid SYstem read drive full passport and as I told all drive`s have modificed Passport and FW to prevent using other drives.
You can tray to take out HDD with BAD sector and format with Seagate tools or You can tray to repair defective sector with HDDREG program (DOS) on PC with SAS FC card. If You`l have good result, put it back to RDD and rebuild as told mr. Tolga.
If You have more problem HDD`s to do this again with next drive.
If You will I can repair You drive`s with PC3000 tool. For this You must sent Drive`s to my and after work I sent it back.
Good lock
to rate and post a comment
(3)
Sergei Nikitin
re: re: re: re: ct Toshiba aquilion 64
May 22, 2018 10:06
Can you rebild firmware of my new hdd's?
to rate and post a comment
(2)
uldis007
re: re: re: re: re: ct Toshiba aquilion 64
May 25, 2018 09:49
Hi Sergei!
Your HDD is ST3300655FC from SEAGATE not st3300653fc.
If System show new HDD`s as DKS2G-K300FC - this is HITACHI HDD, not SEAGATE ??
Where You bay this new FC dive`s?
to rate and post a comment
(2)
uldis007
re: re: re: re: re: re: ct Toshiba aquilion 64
May 26, 2018 02:08
You can read sam information about Avid FibreFly RDD there: http://www.medteh.info/forum/58-3270-1#62525
to rate and post a comment
(3)
Sergei Nikitin
re: re: re: re: ct Toshiba aquilion 64
May 23, 2018 10:05
Hi! Can you change firmware if I send new HDD's to you?
to rate and post a comment
(2)
uldis007
re: re: re: re: re: ct Toshiba aquilion 64
May 26, 2018 02:08
Your New HDD is realy Hitachi RAW drive and no way to made Seagate from it. I find: https://www.pcmleasing.com/product/300gb-15k-fibre-drive-upgrade-for-usp-v/
This drives is adapted to work with HDS USP-V and USP-VM subsystems.
Is ir origiginal RDD configuration with 300GB FC drives in RDD? When manufactured AQ64?
to rate and post a comment
(3)
Sergei Nikitin
re: re: re: re: ct Toshiba aquilion 64
May 29, 2018 03:55
Ok. What if I send HDD's to you how mr. Amado says for formatting to required byte/sector table?
Or maybe you have required HDD's from Toshiba and can sale it me?
to rate and post a comment
(2)
uldis007
re: re: re: re: re: ct Toshiba aquilion 64
May 30, 2018 09:35
When system build Raid (samself) no way to adjust sector seze, it`s integrated in Raid hardware and Firmware. At start Raid initialise and add all HDD (like BIOS in PC) and after them build, format or use massive.
Sergei You not answer to me cuesion about Raid configuration, becose in me AQ64 is 4x5x73gb FC HDD. Is it original complectation?
Best way to comunicate - write e-mail: uldis007@inbox.lv
to rate and post a comment
(82)
(3)
juan pablo amado
re: ct Toshiba aquilion 64
May 24, 2018 10:04
Normally hdd is formatted in 512 bytes / sector; but This array uses 524 bytes/sector ; you need to modify MBR in partition table
to rate and post a comment