Over 90 Total Lots Up For Auction at One Location - WA 04/08

Completing a Voluson 730 Pro /Restore from Image

Tags: Ultrasound, GE

(4)
(1)

Confucius

Completing a Voluson 730 Pro /Restore from Image

January 18, 2014 08:52

Our machine (Voluson 730 P) (Unknown BT, assuming 4/5) - Had started to glitch at start up, occasionally getting an error "unable to write to memory." Also, the ultrasound software would glitch all white, so it was decided to restore the machine from the recovery image. Which had been done.

Now: we do not have/know the BT key (GE refuses to help.) We could not print/save the BT key, the system would freeze and we could not access the key list to print them. We activated the 3-month trial.

Issue 1: 4D (and 3D) scanning isn't enabled? (Possibly just the 4D, unable to confirm 3D scanning.)

Need to install driver for "unknown device." Connected the machine to the network; windows update was unable to locate the driver.

The question is: Could anyone help me place our machine back in service? We restored the machine using the recovery partition, and that is where the machine is at a stand still.

We can see/use the 2D, - but we cannot complete the system restoration.

If anyone is familiar with the process after using the restoration image; perhaps you could sort of; sum up the next necessary steps?

This is our main and only machine, any and all help would be tremendously appreciated!

Log inor Register

to rate and post a comment

(4)
(1)

Confucius

re: Completing a Voluson 730 Pro /Restore from Image

January 19, 2014 09:45

Anyone?

1 person liked this
Log inor Register

to rate and post a comment

(27)
(11)

Diego Salgado

re: re: Completing a Voluson 730 Pro /Restore from Image

January 20, 2014 08:22

What si the software versión ? This machine si Expert o pro versión ? I need moré info to help you

Log inor Register

to rate and post a comment

(4)
(1)

Confucius

re: re: re: Completing a Voluson 730 Pro /Restore from Image

January 20, 2014 10:18

Software vs, BT? The BT is unknown; assuming 4/5 as stated.

Log inor Register

to rate and post a comment

(27)
(11)

Diego Salgado

re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

January 20, 2014 01:07

is very important to know the version of BT having to know which version of software works with the machine, especially for the installation of applications and external devices such as printers, optical drives, among others, have images of the equipment or the serial number ?

Log inor Register

to rate and post a comment

(58)
(1)

MOTSO

re: re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

June 22, 2014 08:15

Please i have V730_BT02 VOLUSON 730 PRO Nr A2622 WITH OPTIONS theodmotso@gmail.com

Log inor Register

to rate and post a comment

(58)
(1)

MOTSO

re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

June 22, 2014 08:15

Please I have VOLUSON 730PRO BT02 With Options

Log inor Register

to rate and post a comment

(378)
(61)
(13)

Ricardo A. Sanchez

re: re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

June 25, 2014 08:53

what problem do you have?

Log inor Register

to rate and post a comment

(7)
(1)
(1)

Théodore Tchofo Motso

re: re: re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

June 26, 2014 10:51

Dear Sirs

Thank you much for nformations, about BT02 AND BT05. I'm confuse, may i snap a picture sreen installation of BT02 I HAVE that can not terminate initialization process, and the screen of BT05 nst that terminate initialisation process, rich to the windows where there are some menu of DVD-rom to install, but on that windows, when i select the version of my system, BT05 DVD TOLD ME THAT THE SYSTEM of my volution is BT02 AND ASKING ME IF INSTALLATION CAN CONTINUE he should format every things..i stopped there installation...how to do?

may i send you pictures of thoses informations?

This is the serial informations of my volution,

VOLUSON730 PRO A20622 MARCH 2003 230VOLTS

OPTONS

1.REAL TIME 4D
2.DICOM
3.HARMONIC IMAGING
4.VOCAL

thanks lot Sir

1 person liked this
Log inor Register

to rate and post a comment

(378)
(61)
(13)

Ricardo A. Sanchez

re: re: re: re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

June 26, 2014 06:50

please send pictures to ricardo@ultrasolutions.com

Log inor Register

to rate and post a comment

(20)
(2)

TECNOMEDICS

re: re: re: re: re: re: re: Completing a Voluson 730 Pro /Restore from Image

April 29, 2021 11:42

I finally got the BT05 and the iso from the dvd.

Log inor Register

to rate and post a comment

(4)
(1)

Confucius

re: re: Completing a Voluson 730 Pro /Restore from Image

January 20, 2014 08:32

Never mind people, looks like this website is for people who want free software and manuals, more than anything else.

Log inor Register

to rate and post a comment

(378)
(61)
(13)

Ricardo A. Sanchez

re: Completing a Voluson 730 Pro /Restore from Image

January 20, 2014 05:00

you need to call an engineer with experience on these system, first is need to find what software level the system is, only an engineer can check all boards and parts and find out, after you have the software level you need to install it and get the license options, if you dont have a caopy you will need to contact GE so you can buy these. you have a lot of work to do, contact an engineer with experience on these systems if not will be very hard to fix it. Thanks.

1 person liked this
Log inor Register

to rate and post a comment

stats
DOTmed text ad

We provide sales, service & repair for portable ultrasound systems & probes

If you have a broken Sonosite, Mindray, GE, Philips, Hitachi, or Aloka system or probe contact us today. Free ultrasound & probe EVALS with 1 Year Warranty on all repairs. We repair all orders in 1-5 days. Call 844-644-5440 Email: Sales@Lenard.Healthcare

DOTmed Certified stats
advertisement

Upcoming Auction Events

NorthWest Supply
TIMED
Apr 08, 2024 (98 lots)