Over 90 Total Lots Up For Auction at One Location - WA 04/08

analogic an8102 rf ampilfier

(6)
(1)

Hyunsup Kim

analogic an8102 rf ampilfier

December 22, 2011 02:02

Anyone have the service manual/schematic for the Analogic AN8102 amplifier?I have a unit that has problem with high DC power error(no DC power at the start. Disconnected power lines from amp section, and still no high DC voltage (should be around 150VDC, I think)

Log inor Register

to rate and post a comment

(56)
(19)

Mikhail Zakurdaew

Re: analogic an8102 rf ampilfier

December 23, 2011 09:43

Good day!
Check the MOS-FET transistor and circuitry in the power supply for the preamp. Diagrams and service manual I have.
Good luck!

1 person liked this
Log inor Register

to rate and post a comment

(6)
(1)

Hyunsup Kim

Re: analogic an8102 rf ampilfier

December 26, 2011 10:13

Hi, let me know how I can contact you. I was able to force the high voltage to come up by enabling a pin, so I know the actual voltage section is fine. Replaced the microprocessor for possible corrupt firmware to no avail. RF pre/amp section seemed to be ok. Something is holding the high voltage down. Thanks

Log inor Register

to rate and post a comment

(1)

RAUL BIANCULLI

Re: analogic an8102 rf ampilfier

December 27, 2011 05:08

I am interested to get the AN8102 service manual.
raul_bianculli@netgate.com.uy

Log inor Register

to rate and post a comment

majid yousefi

re: Re: analogic an8102 rf ampilfier

June 29, 2015 04:24

I need this too. I appreciate if you send it to me. parsimard@gmail.com
thanks

Log inor Register

to rate and post a comment

(35)

(7)

Eugene Telles

Re: analogic an8102 rf ampilfier

February 08, 2012 11:35

Hello,
I am interested in getting the manual and diagrams. Please call me at 719-393-7373
Thanks. Gene

Log inor Register

to rate and post a comment

(2)

Steve Kim

re: Re: analogic an8102 rf ampilfier

December 05, 2013 12:38

How do I contact you to get Analogic 8102/8103 rf amp manual and schmatic diagrams? Please advise me.

Regards,
Steve.

Log inor Register

to rate and post a comment

(11)
(1)

David Doucet

re: Re: analogic an8102 rf ampilfier

December 10, 2013 01:17

Would it be possible to get a copy of the service manuals and schematics also? dave.doucet@dynamicimagingservice.com

Log inor Register

to rate and post a comment

(4)

(1)

Jorge Balbiano

re: Re: analogic an8102 rf ampilfier

December 13, 2013 04:17

I'm also need service manual and schematics. Please contact me jorge_balbiano@yahoo.com

Log inor Register

to rate and post a comment

egor dementev

re: Re: analogic an8102 rf ampilfier

January 26, 2015 08:09

there burned transistors on them number 21-514021 21-514020 and I can not find such than they can be replaced?

1 person liked this
Log inor Register

to rate and post a comment

majid yousefi

re: Re: analogic an8102 rf ampilfier

June 29, 2015 04:24

I appreciate if you send it to me.
parsimard@gmail.com
thanks

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: re: Re: analogic an8102 rf ampilfier

August 02, 2017 08:05

We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

(16)
(5)

Mike Manning

re: Re: analogic an8102 rf ampilfier

August 05, 2015 10:45

Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and send them to me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: re: Re: analogic an8102 rf ampilfier

August 02, 2017 08:05

We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

(16)
(5)

Mike Manning

re: Re: analogic an8102 rf ampilfier

August 02, 2017 03:23

Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and share them with me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927

Log inor Register

to rate and post a comment

(45)
(1)

chalie alvarez

re: Re: analogic an8102 rf ampilfier

July 18, 2019 09:10

can I have a copy of the service manual and schematics please

Log inor Register

to rate and post a comment

(20)
(1)

Mauro Neves

re: Re: analogic an8102 rf ampilfier

July 19, 2019 10:26

Hi Mikhail!

Can I have the service manual of AN8102 from you?
My e-mail is mauro.neves@hotmail.com.

Thank you

Log inor Register

to rate and post a comment

(3)

Frank Qiao

re: analogic an8102 rf ampilfier

August 02, 2017 08:05

The Anagogic RFPA is a uP based system, any inner fault will result into FAULT status. You need to solve the fault(s) and possibly need to re-calibrate the system via necessary procedure by software. I don't think you can fix the fault simply replacing a component. We have the necessary facilities and skills. frank_qiao@hotmail.com

Log inor Register

to rate and post a comment

stats
DOTmed text ad

stats
advertisement

Próximos Eventos de Subasta

NorthWest Supply
TIMED
Apr 08, 2024 (99 lots)