USED SYSTEM IN GOOD CONDITION
ALL PARTS SHOWN IN PICTURES
3500.00
RiOs 30 Water Purification System
Includes:
Millipore RiOs 30 Reverse Osmosis System, cat. no. ZR0S60030
Millipore Prepak 13 Pretreatment Pack, cat. no. PRPR0L003
Shurflo Accumulator, model 84-522-02
Shurflo Water Pump, model 8025-933-236
Park International RT Composite Pressure Tank
Pentair Structural 12150735 Composite Pressure Tank, size 735
(2) Millipore tank 100 liter PE, TANKPE100 Pure Water Storage Reservoir
Specs from the Manufacturer:
Flow Rate, L/h 30
Water Recovery, % Up to 45
Ion Rejection, % 95–99
Organic Rejection, %
(MW > 200 Dalton) ≥ 99
Particle Rejection, % ≥ 99
Bacteria, cfu/mL < 10
Height, cm (in.) 73.4 (28.9)
Width, cm (in.) 66.2 (26.1)
Depth, cm (in.) 44.1 (17.4)
Operating Weight, kg (lb) 33 (72.8)
Key Features
Utilize a three-step water treatment process
Provide total control of all functions, operating parameters and standard accessory components within the RiOs system itself and within the external pure water distribution loop
Do not usually require an external control box
Pretreatment Features
Progard* L pack removes particles (0.5µm filter), free chlorine, and colloids (activated carbon filter) from tap water to protect the system
Anti-scaling agent protects the reverse osmosis membrane in hard water areas
Bactericidal carbon prevents unwanted bacteria growth
Pretreatment packs are tailored to the feedwater source
Advanced Reverse Osmosis (RO) Features
Removes 95 to 99% of inorganic ions and 99% of all dissolved organics (MW 200 Daltons), microorganisms and particles
Recycles part of the RO reject water back to the RO membrane feedwater stream
Allows water recovery to be adjusted up to 70% to optimize water consumption, depending on the feedwater quality and the pretreatment sequence used
Maintains constant flowrate from 7 to 30°C
Ultraviolet Sanitization Features
Uses a 254nm UV lamp
Leads to a log reduction value (LRV) of four in the bacteria count of the water, irrespective of the system's nominal flowrate
System Operation Features
After each purification step, relevant parameters are checked by the system
Water quality monitoring within the pure water distribution loop (resistivity) can also be checked by the system
Resistivity test is designed to meet the requirements of USP 26 (645) suitability test
Water quality data is recorded by the system in real time for full traceability
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
