MPN: K200
Godlevsky Enterprises LLC ~ Cliff Godlevsky ~ Call/Text or Whatsapp: 52070903153M Mini-Driver II Pneumatic Drill with Automatic Pin Driver & Wire Driver Attachments is in excellent tested working condition. Comes with a Jacobs chuck and Quick connect attachments. We tested this unit with compressed air and the forward and reverse are working properly. We also tested with the attachments and they are also working properly. We personally removed this set from a local surgery center where it was in use. Guaranteed not to be DOA.
3M K200 Mini-Driver II Pneumatic Jacobs Drill w/ Pin Wire Drivers Fwd/Rev & Hose
3M K200 Mini-Driver II Pneumatic Jacobs Drill w/ Pin Wire Drivers Fwd/Rev & Hose
Click images to enlarge
Description
Godlevsky Enterprises LLC ~ Cliff Godlevsky ~ Call/Text or Whatsapp: 5207090315
3MMini-Driver II Pneumatic Drill with Automatic Pin Driver & Wire Driver Attachments is in excellent tested working condition. Comes with a Jacobs chuck and Quick connect attachments. We tested this unit with compressed air and the forward and reverse are working properly. We also tested with the attachments and they are also working properly. We personally removed this set from a local surgery center where it was in use. Guaranteed not to be DOA.
3M K200 Mini-Driver II Handpiece
Pneumatic
Vane Motor
Forward & Reverse
360 Swivel Hose Connector
Trigger Throttle With Safety Slide
Variable Speed: 0-1,100rpm
Stall Torque: 110in-oz (776n-mm) (Nominal)
Nitrogen Consumption: 5.0scfm (Nominal)
Normal Operating Pressure: 90-110psi
Weight: 19.7oz (560g)
Length: 6.25in (159mm)
Material: Anodized Aluminum & Stainless Steel
3M Mini K111A Automatic Wire Driver Attachment
Quick release chuck lever allows K-wire insertion, removal and advancement without the use of additional keys and accesories
Insert is connected to a stainless steel arbor with an internal cannulation diameter of 0.065in
Adjustable nosepiece with line indicators in increments 0.028in, 0.035in, 0.045in, 0.062in and 0.071in
Variable Speed: 0-1,100rpm
Through Cannulation: 0.028in - 0.071in
3M Mini II K211 Automatic Pin Driver Attachment
Designed to drive pins (wires) and drill bits
Quick release chuck lever allows insertion, removal and advancement without the use of additional keys and accesories
Adjustable nosepiece for wires 1.6-4.0mm in diameter
Variable Speed: 0-1,100rpm
Through Cannulation: 0.062in - 0.156in
3M K114A Quick Connect Drill Chuck Attachment
For Synthes type Quick Connect Type Fittings
Drll Bits
Taps
Screwdriver Shafts
3M Jacobs Chuck Drill Attachment
0-5/32"
No Key
Shipping Dimensions: 8" x 8" x 12"
Weight 3.5 lbs.
______________________________________________________________
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Willmarg99 Equipment Sales, Crystal M. Coolidge Arizona,,
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof.This item has been cleaned and handled in accordance with the manufacturer's instructions.
Pictures sell!
Auctiva offers Free Image Hosting and Editing.300+ Listing Templates!
Auctiva gets you noticed!
The complete Selling Solution.
Track Page Views With
Auctiva's Counter
Return Policy