Here is an Infors HT Multitron Triple Incubator Shaker Humidity/CO2 Unit14
Condition:
This Infors HT Multitron Triple Incubator Shaker is in good working condition.
Please see the exact video and photos below.
Testing we performed:
The Infors HT Multitron Triple Incubator Shaker passed all tests and was found to be fully functional:
Tested power: PASSED
Tested to max RPM (250): PASSED
Tested full temperature range: PASSED
Tested door safety shutoff: PASSED
Tested capillary thermostat shutoff: PASSED
Tested CO2 system to 19.5%: PASSED
Tested steam generator: PASSED
Tested Humidity to 85%: PASSED
The testing performed on this Infors HT Multitron Triple Incubator Shaker confirms it is in good working condition.
This includes the temperature control, doors, controls and shaking platforms.
Due to this testing you can purchase this Infors HT Multitron Triple Incubator Shaker with confidence knowing it is ready to go.
System consists of:
Infors HT Multitron HT Triple Stack Incubator Shaker
Multitron Sticky Mat Trays (QTY:3)
Standard power cables (Qty: 3)
We have flask holder/sticky mat tray options on hand that can be installed per request.
Configuration and Setup:
Capacity: approx 200 Liters Per Chamber
Interior Dimensions: 390 x 925 x 550 mm per chamber;
Exterior Dimensions: 1075 x 865 x 1994 mm
Temperature Range: 12C below ambient to 65C (has refrigeration function, that allows it to go 10-12C below ambient temperature)
Power Requirements: 30.6A max current draw @ 115V
Shaking Speed: 20-250 RPM (Note: Unit has 50mm Throw. Manual states recommended max setting for all three units is 250 RPM)
CO2 Range: 0-19.5% CO2
Humidity Control (up to 40C): range 20... .max. 85% rH, Control by Vaporizer, Water Inlet Pressure max 1Bar
Video Description:
The video below gives an overview and demonstrates functionality of the Infors HT Multitron Triple Incubator Shaker.
TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.
DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.
ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
