Drager CMS Chip Measurement System
Portable Multi-Gas Vapor Analyzer
FREE US SHIPPING!
Purchase instantly by clicking the Buy Now button above.
This Drager CMS is a portable gas vapor analyzer. It powers on and looks ready to use without error codes. It is preowned but comes in the original manufacturer's box.
Includes the Drager CMS instrument, battery compartment tool, carry strap, original inspection documents and 4 AA Energizer E91 batteries. Can be used to analyze many different gas vapors depending on the chip used. 51 different model chips are available through Drager and I have included a list of the compatible chips, ppm ranges and part numbers below.
Specifics-
Drager Portable Gas Vapor Analyzer
Model: CMS (Chip Measurement System)
Part No: 6405300
Serial No: ARDE-0086
Version: V4.02
4 AA Battery Operation (Energizer E91)
Attached Carry Strap & Rubber bumpers
Battery Compartment Tool
Original Box & Original Pass Inspection Documents
Manufacturer's Description-
The world's only Chip Measurement System (CMS) makes spot measurements as easy as 1, 2, 3: insert chip--start measurement--read measurement result on the LCD display. The Drager CMS combines the advantages of the Drager Tubes with those of optoelectronic analysis system. Two components define the system: the analyser and the substance specific chip.
Simple to use
The Dräger CMS is ready for use after only a brief instruction. It makes no difference which gas or vapor you wish to measure – the instrument is used in the same way every time. The operation is guided by a menu on the display and a single button/switch. The display can be backlit and is available in German, English, French or Spanish. After an automatic system self-test, the analyser is powered up and the measurement system is immediately ready for operation. Simply insert the chip, perform the measurement and read the measurement result displayed as a concentration on the screen. At the end of the measurement, the chip is automatically ejected from the instrument, and the analyser shuts down. An audible signal sounds after each operating step. Power is supplied by four standard and easily replaceable batteries which are especially suited to the analyser's requirements (see technical data). The battery capacity allows for more than seven hours of measurement and is, of course, always displayed on the screen.
Accurate
The principle of mass current measurement ensures that the instrument remains unaffected by fluctuations in air pressure. Because the chips are calibrated before leaving the factory, there is no need for the user to calibrate the Dräger CMS. Any possible temperature and humidity effects are checked during factory calibration. The analyser is explosion protected and certified in accordance with Cenelec (Europe), UL (USA) and UL/CSA (Canada). In addition, the system is protected against dust and splash water in accordance with IP 54, and is resistant to electromagnetic waves.
Remote-System
To allow measurements at places which are difficult to access, a remote system is available. This comprises of an additional pump and extension hose, and is connected to the back of the analyser. Because the remote system is activated by its own switch, the system can remain attached to the analyser. A telescopic probe can also be attached to the Remote-System.
Compatible Substance Specific Chips Available-
Ammonia 2 - 50 ppm 64 06 130
Ammonia 10 - 150 ppm 64 06 020
Ammonia 100 - 2000 ppm 64 06 570
Benzene 50 - 2500 ppb 64 06 600
Benzene 0.2 - 10 ppm 64 06 030
Benzene 0.5 - 10 ppm 64 06 160
Benzene 10 - 250 ppm 64 06 280
Butadiene 1 - 25 ppm 64 06 460
Carbon Dioxide 200 - 3000 ppm 64 06 190
Carbon Dioxide 1000 - 25000 ppm 64 06 070
Carbon Dioxide 1 - 20 Vol.-% 64 06 210
Carbon Monoxide 5 - 150 ppm 64 06 080
Chlorine 0.2 - 10 ppm 64 06 010
Ethanol 100 - 2500 ppm 64 06 370
Ethylene Oxide 0.4 - 5 ppm 64 06 580
Formaldehyde 0.2 - 5 ppm 64 06 540
GasodorTMS-FreeTM 5 - 30 mg/m3 64 06 590
Hydrocyanic Acid 2 - 50 ppm 64 06 100
Hydrochloric Acid 1 - 25 ppm 64 06 090
Hydrochloric Acid 20 - 500 ppm 64 06 140
Hydrogen Peroxide 0.2 - 2 ppm 64 06 440
Hydrogen Sulfide 0.2 - 5 ppm 64 06 520
Hydrogen Sulfide 2 - 50 ppm 64 06 050
Hydrogen Sulfide 20 - 500 ppm 64 06 150
Hydrogen Sulfide 100 - 2500 ppm 64 06 220
Mercaptan 0.25 - 6 ppm 64 06 360
Methanol 20 - 500 ppm 64 06 380
Methylene Chloride 20 - 200 ppm 64 06 510
MTBE 10 - 200 ppm 64 06 530
Nirogen Dioxide 0.5 - 25 ppm 64 06 120
Nitrous Fumes 0.5 - 15 ppm 64 06 060
Nitrous Fume 10 - 200 ppm 64 06 240
Ozone 25 - 1000 ppb 64 06 430
Oxygen 1 - 30 Vol.-% 64 06 490
o-Xylene 10 - 300 ppm 64 06 260
Petroleum Hydrocarbons 20 - 500 ppm 64 06 200
Petroleum Hydrocarbons 100 - 3000 ppm 64 06 270
Perchloroethylene 5 - 150 ppm 64 06 040
Phosgene 0.05 - 2 ppm 64 06 340
Phosphine 0.1 - 2.5 ppm 64 06 400
Phosphine 1 - 25 ppm 64 06 410
Phosphine 20 - 500 ppm 64 06 420
Phosphine 200 - 5000 ppm 64 06 500
Propane 100 - 2000 ppm 64 06 310
i-Propanol 40 - 1000 ppm 64 06 390
Sulfur Dioxide 0.4 - 10 ppm 64 06 110
Sulfur Dioxide 5 - 150 ppm 64 06 180
Styrene 2 - 40 ppm 64 06 560
Toluene 10 - 300 ppm 64 06 250
Trichlorethylene 5 - 100 ppm 64 06 320
Vinyl Chloride 0.3 - 10 ppm 64 06 170.
CONDITION
This portable gas analyzer appears to be in good operating condition with no sign of wear or damage. The original passed inspection documents are included. I installed 4 AA batteries and it powers on and the display is working and goes to "Load Chip" on screen after device startup. The original box does show some wear and tear but still protects the instrument well. I believe this unit will work fine if a chip is installed.
AGE
2012
DIMENSIONS
Original Box: 10" x 6 1/2" x 4"
Analyzer only: 8 1/2" x 4" x 2 1/2"
WARRANTY
I stand behind everything I sell and I guarantee this portable Drager CMS gas analyzer is exact to the description and pictures I have provided here or return it for a refund.
SHIPPING
Weight before packing is 2 lbs, 4 ounces for everything pictured.
FREE US SHIPPING!!
INTERNATIONAL BUYERS WELCOME
Return Policy
